Head of Department – MECH

Educational Qualification

• Ph. D. in Mechanical Engineering, Pondicherry Central University, Puducherry (2017)
• M. Tech (Design Engineering) in Mechanical Engineering, Kakatiya University, Warangal, Telangana (2007)
• B. Tech. from Dr. Samuel George Institute of Engineering & Technology, J.N.T.U., Hyderabad (2001)

Teaching Experience

S.No.	Name of the Organization	Designation	Period
1	AMR Memorial College of Engineering and Technology,Narsaraopet	Principal & Professor	Aug 2019- Till date
2	Nalanda Institute of Engineering &Technology ,Sattenapalli	Professor & R&D Head	June 2018- Aug 2019
3	St.Mary’s Engineering College , Hyderabad	HOD &Vice-Principal	July 2014-June 2018
4	Netaji Institute of Engineering &Technology, Hyderabad	Assistant Professor	July 2007-June 2014
5	Ananth Technologies Ltd, Hyderabad	Design Engineer	June 2001- Nov 2005

Doctoral Thesis (Ph. D)

Title of Thesis	“Experimental study and optimization of process parameters on Wire Electro Discharge Machine process”
Supervisor	Dr. K SAMMAIAH
Area of research	Wire Electro Discharge Machine process
Status of Thesis	Highly Commended from both Indian and foreign examiners.
Stream	Manufacturing Technology

Projects Handled

• Guide for Ph.D Scholars : 2
• Number of PG projects guided: 12
• Number of UG projects guided: 25

Professional Memberships

• Lifetime Member in Teaching and Education Research Association (TERA) with ID TERA-M19608.
• Fellow Member of Institute of Research Engineers and Doctors (IRED) having membership ID as SM101000602577 having validity from 10^th DEC 2019-10^th DEC 2022.
• Member of International Association of Journals and Conferences having membership ID as 9989490529 valid from December 2019 to December 2020.
• Member of International Technology and Engineering Educators Association (ITEEA).
• Member of International Association of Engineers (IAENG).
• Member of Institute for Engineering Research and Publication (IFERP)

Journal Publications

• SAKRAM KORRA, Dr.CH.MALLIKARJUN, G.BALA NARASIMHA, International Journal of Advanced Research Foundation [IJRAF], ANALYSIS AND DESIGN OF INDUSTRIAL SPHERICAL PRESSURE VESSEL USING FEA. NOVEMBER 2017 VOLUME 4, ISSUE 11
• SAKRAM KORRA, Dr.CH.MALLIKARJUN, K.LINGAIAH, International Journal of Ethics in Engineering & Management Education [IJEEE], ANALYSIS OF HCR AND LCR GEARS: STRENGTH BASE.OCTOBER 2017, VOLUME 4,ISSUE 10
• SAKRAM KORRA, Dr. CH. MALLIKARJUN,G.BALA NARASIMHA, International Journal of Multidisciplinary Engineering in Current Research [IJMEC] ENHANCEMENT OF CRITICAL LOAD ON CYLINDRICAL SHELLS USING TAGUCHI TECHNIQUES AND REGRESSION ANALYSIS. SEPTEMBER 2017, VOLUME 2, ISSUE 9.
• SAKRAMKORRA, Dr.CH.MALLIKARJUN, P.RAJESHKANNA International Journal of Ethics in Engineering & Management Education [IJEEE],DESIGN AND ANALYSIS OF CFD SIMULATION ON CERAMIC HEAT EXCHANGER.JULY 2017,VOLUME 4,ISSUE 7.
• SAKRAM KORRA, Dr. CH. MALLIKARJUN,G.BALA NARASIMHA, International Journal of Multidisciplinary Engineering in Current Research [IJMEC] ANALYSIS AND DESIGN OF THE PRESSURE VESSEL BY UTILIZING FEM. JUNE 2017, VOLUME 2,ISSUE 6.
• CH MALLIKARJUN, Dr. MAHADEVAN, International Journal of Research Sciences and Advanced Engineering [IJRSAE] ,AN INVESTIGATION ON THE EFFECT AND OPTIMIZATION OF MACHINING PARAMETERS ON THE KERF AND MATERIAL REMOVAL RATE OF TITANIUM ALLOY. JULY-SEP 2017 VOLUME 2, ISSUE 19 .32-39
• CH MALLIKARJUN, Dr. MAHADEVAN, International Journal of Computers, Electrical and Advanced Communication Engineering [IJCEACE], A SURVEY ON IMPACT OF WIRE EDM PARAMETERS ON KERF WIDTH, MRR, SURFACE HARSHNESS AND CUTTING RATE. JAN-JULY 2017, , VOLUME 1, ISSUE 11 126-135
• CH MALLIKARJUN, Dr. MAHADEVAN, International Journal of Technology and Engineering Science [IJTES], AN EXAMINATION ON THE IMPACT AND ENHANCEMENT OF MACHINING PARAMETERS ON THE KERF AND MATERIAL REMOVAL RATE OF TITANIUM COMBINATION. JANUARY (2016), VOLUME 4, ISSUE 1. 7075-7080
• CH.MALLIKARJUN,G.BALA NARASIMHA,S.RAMTHULLA,T.RAJA SANTOSH, International Journal of Innovative Research in Science,Engineering and Technology[IJIRSET], IMPACT OF CRYSTALLOGRAPHIC SURFACE ON THE PLANAR ANISOTROPY OF TIGHTENING REACTION IN 316 STAINLESS STEEL SHEET. MAY 2016, VOLUME 5,ISSUE 5.
• CH MALLIKARJUN, Dr. MAHADEVAN, International Journal of Technology and Engineering Science [IJTES], WIRE ELECTRICAL DISCHARGE MACHINING (WEDM) AMONGST THE MOST UTILIZED NON-CONVENTIONAL MACHINING PROCESS. MARCH (2015), VOLUME 3, ISSUE 3. 34424-34428

Paper Presentations in Conferences

• “A review on nano abrasive finishing processes”. International conference on Material processing and characterizations, March 12^th,13^th 2012, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad.
• “Effect of WEDM Parameters on Machinability of Nimonic-90”, International Conference on Smart systems November 2013 JBIET, Hyderabad
• “Case Study on Recharging of Abrasives in Abrasive Water Jet Machining”, International Conference on “Emerging trends in Mechanical Engineering” held on 23^rd,24^th Feb2014, Abhinav Hi-Tech College of Engineering and Technology, Hyderabad.
• “Application of RSM (Response Surface Methodology) on WEDM of Titanium Alloy”. International Conference on ICRTET July2^nd, 3^rd, 4^th 2015, SNJB College of Engineering, Chandwad, Nasik, Maharashtra.
• “Flow and Motion of a Six Degree of Freedom Robot Manipulator”, OSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN:2278-1684,p-ISSN: 2320-334X PP. 45-53

Conferences and Other Events Organised

• Organizer for International Conference on “Emerging trends in Mechanical Engineering” held on 23^rd, 24^th Feb2014, Abhinav Hi-Tech College of Engineering and Technology, Hyderabad.
• Convener for National level Technical workshop on “TRENDS IN AUTOMOBILE ENGINEERING” conducted at St.Mary’s Engineering College, Deshmukhi Village, Nalgonda Dist. 508284 on Jan 28^th, 29^th& 30^th 2016.
• Co-ordinator for National level workshop on “ROBOT 2K-16” conducted at St.Mary’s Engineering College, Deshmukhi Village, Nalgonda Dist. 508284 on 3^rd,4^th October 2016.
• Assistant. Chief Superintendent for Group-II Exam conducted by Telangana Government at St.Mary’s Engineering College, Hyderabad on 11^th and 13^th November 2016.
• Co-ordinator for faculty development programme on “Advanced Teaching Methodologies” conducted at St.Mary’s Engineering College, on 22^nd &23^rd June 2017.

Workshops / Seminars / FDPs Attended

• Participated 3-days “Entrepreneurship Awareness Camp” conducted by JNTU in collaboration with department of Science & Technology, New Delhi held from 12^th  Sep 2003 to 14^th Sep 2003.
• Participated in one day workshop on “Modern Engineering Workshop Practice” organized by JNTU, Ananthapur held on 15^th June 2008.
• Participated in one day workshop on “Recent Trends in Technical Education” organized by the UGC- academic staff college, JNTU held on 20^th March 2010.
• Participated in Six-Day Faculty Development Programme on “HYPER-WORKS & COMPUTATIONAL FLUID DYNAMICS” conducted by St.Martin’s Engineering College from 5^th to 10^th Dec, 2016.
• Participated in FDP on “Innovative Teaching Techniques in Engineering Graphics by K.L Narayana” at Anurag Group of Institutions on 05^th, 06th & 07^th July 2017

Labs Established

• Engineering Workshop Practice
• Fluid Mechanics & Hydraulic Machines
• Metallurgy & Material Science
• Thermal Engineering
• Heat Transfer
• Thermodynamics
• Kinetics & Dynamics

Industry Experience

Worked  for 4 years as Design Engineer in Ananth Technologies Ltd, Hyderabad from June 2001 to Nov 2003

Areas of Interests in Teaching

• Strength of materials
• Fluid Mechanics
• Engineering Graphics
• Engineering Mechanics
• Operations Research
• Finite Element Methods